Tutorial: Thinkdiag Reset Transimission On GM

If you have any work done on your transmission or if you're having switching gears this should help you

Car module:Car module GM chevy suburban 2015

Purpose: reset transmission control box

 The tool used: Launch Thinkdiag

 

1.Connected Thinkdiag and vehicle by OBD port.It shows green light mean connection succeeded

 

2.Open the app and go into the Thinkstore

3.Select our software
we can either select GM which will let us reset all of our GM
and chevy vehicles or we can select RESEBOX


Here, we select RESETBOX
Connecting bluetooth....

Select GM

Communicating ,pls wait...


Switch on ignition ,Then press OK to continue

4.Choose your vehicle.here we choose : Chevrolet->suburban->2014-2018-transmission control module



5.Okey, Confirm our car information,press OK to continue

6.just press Reset, It will do the job automatically!

Work done!
Best price of Thinkcar Thinkdiag here:
http://www.obdexpress.co.uk/wholesale/launch-thinkdiag-obd2-code-scanner.html

 

 

Tutorial: 2013 GMC Sierra 1500 Denali Relearn Injector by Launch ThinkDiag

ThinkDiag with 16 kind of special functions:
1.Oil Reset Service
2.Steering Angle Calibration
3.Electronic Parking Brake Reset
4.Battery Register & Battery Maintenance
5.ABS Bleeding
6.Electronic Throttle Position Reset & Learn
7.Diesel Particulate Filter (DPF) Regeneration
8.Tire Pressure Monitor System Reset
9.Tooth Learning
10.Anti-theft Matching
11.Injector matching
MaEET
12.Air Suspension Reset
13. Gearbox Reset
14.Sunroof RESET
15.AFS Reset
(EGR)
16.EGR Reset

Here, we we’re going to do a fuel injector service on a GMC Denali 2013 by ThinkDiag OBD2 All system diagnostic tool

If your fuel injectors ever need to be replaced, then you can go ahead and change that with this device.



Let’s start now!

This is 2013 GMC Sierra 1500 Denali

Plug the ThinkDiag device into OBDII port inyour vehicle

Turn the ignition on

Open the ThinkDiag  APP

Go to ThinkStore->Select INJECTOR

Connecting Bluetooth…

When hear the beep that means it’s connecting to the Thinkdiag device

Select GM

It will ask to switch on ignition, we have turned on, so just click “OK” to continue

Pay attention to this info:

If the first bit of the VIN is the L letter. Please select path: CHINNESECAR->SGM. Press [OK] enter GM software. Press [Cancel] exit.

Here click “OK”

Select LD Trk, MPV, Incomplete->GMC truck->Sierra->2007-2013

Confirm the vehicle info

There are two module options:

Engine control module

Glow plug control module

Whatever we change, both the modules need to be changed.

So go to Engine Control Module firstly

If the cylinder 1 was changed out, we’ll go with selecting Cylinder 1 Injector Identifier

Follow the prompt to stop the vehicle and engine, and turn the ignition on, then click “OK”

The identifier will be directly on the part that you replace so you can get the number from there.

Performed successfully

Then can go back to cylinder 1 injector identifier to check the identifier just changed

After that, select Glow plug control module to change the identifier

The operation steps are same as the “Engine Control Module”

Job’s done!

http://www.obdexpress.co.uk/wholesale/launch-thinkdiag-obd2-code-scanner.html

How to diagnose Benz GLK_Class with Launch Thinkdiag ?

Car model and year: 2013 Mercedes Benz GLK_Class Aim: Read fault codes, clear codes, read DataStream, special functions etc.   Mercedes Benz code reader: Bluetooth Launch Thinkdiag OBD2 full-system scanner   Procedure: Plug Launch Thinkdiag into the OBD2 port of car, when you hear the beep and you see the green light you know it's connected.   We have the key on the position and we're going to show you a few functions that we can do. There are two ways to get into the APP itself:

1. First way would be to go into your Think store.

You can select the software here, if you don't have it downloaded you would select "Download"; if you do have it downloaded you would just select the software.  

2. 2nd way would be to select all systems full functions which would automatically scan the vehicle for you.

We have make ,year, model and VIN, click on "Next Step".  

1. Health report : read codes and clear codes.

We go into "Health report" first.   The health report is going to start scanning the vehicle and see if you're having any issues with any of the electronic components there. So, it's going to start scanning each module. If you see the module that you want to test before the scan is finished, you can press the "pause" function, that will stop the scan and give you the information.   ECM information.   Have option: read fault code. There is no fault. If you are worried, you can clear them  

2. Read data stream.

  If you want to see it in graph form, you could press "Combine", select the options you want to graph. A nice feature with Launch Thinkdiag scan tool like pinch and zoom anything like that, so you can change the scaling thereby pinching it this way and then bring it on the screen, can you scroll it that's actually great..  

3. Special functions.

Configuration -SCN Configuration-manual settings Tech-in process   Enter " Tech-in process" and have the following options:   okay.   Launch Thinkdiag good source: http://www.obdexpress.co.uk/wholesale/launch-thinkdiag-obd2-code-scanner.html